Sway Bar Kit With Bushings, Front (SB016) And Rear (SB033)

$599.95

BMR Suspension designed the SB037 sway bar kit for street performance, autocross, and road race applications.

Description

This means increased performance with no sacrifices. The SB037 attaches to your Camaro with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB037 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.!For 2012 ZL1, use BMR part number SB039 due to electric power steering rack.FRONTHole 1 (Boot-Leg end of bracket)98% stiffer than OE barHole 2 (Center)146% stiffer than OE barHole 3 (Flat end of bracket)214% stiffer than OE barREAROE SS bar (FE4)-Hole number 1 provides just over 100% increase in rate over the factory FE4 bar-Hole number 2 is 150%-Hole number 3 is 200%OE ZL1 bar (FE5)-Hole number 1 provides just over 25% increase in rate over the factory FE4 bar-Hole number 2 is 40%-Hole number 3 is 75%FITMENT NOTE: SB033 IS DESIGNED AS A DIRECT REPLACEMENT FOR FE4 REAR SUSPENSION SYSTEMS, WHERE THE SWAY BAR END LINKS ARE LOCATED OUTBOARD OF THE REAR SHOCKS. THIS INCLUDES 2012+ ZL1 AND 2013+ SS. 2010-2012 SS MAY UPGRADE TO THIS FE4 BAR IF REAR LOWER CONTROL ARMS AND REAR SWAY BAR END LINKS ARE UPGRADED TO FE4 SPEC. SB033 WILL NOT FIT ON V6 APPLICATION DUE TO INTERFERENCE WITH REAR V6 BRAKE CALIPERS.

Additional Attributes:

GTIN: 00887753326195
Front Sway Bar Adjustable: 3-position
Front Sway Bar Diameter (in): 1.125 inches
Front Sway Bar Diameter (mm): 29.0 mm
Front Sway Bar Type: Hollow
Mounting Hardware Included: Yes
Position: Front and rear
Quantity: Sold as a kit
Rear Sway Bar Adjustable: 3-position
Rear Sway Bar Diameter (in): 1.25 inches
Rear Sway Bar Diameter (mm): 32.0 mm
Rear Sway Bar Type: Hollow
Sway Bar Finish: Black hammertone powdercoated
Sway Bar Material: Steel

Extended Information:

Emissions : CARB Eligible
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: PK
Dimension: 5 x 14 x 66 inches
Weight: 31 PG

Additional information

Weight 496 oz
Dimensions 5 × 14 × 66 in

Reviews

There are no reviews yet.

Be the first to review “Sway Bar Kit With Bushings, Front (SB016) And Rear (SB033)”

Your email address will not be published. Required fields are marked *