Sway Bar Kit With Bushings, Front, Hollow 1.25″

$269.95

BMR Suspension designed the SB004 sway bar kit for street performance, autocross, and road race applications.

Description

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB004 front sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 1.25-inch DOM tubing, the SB004 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB004 attaches to your Nova with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The fabricated laser cut, TIG-welded steel sway bar end links are reinforced to minimize deflection.BMR Suspension designed the SB004 sway bar for street performance, autocross, and road race applications. The SB004 gives you a 200% increase in rate over the stock bar. These rate increases allow you to drive harder through corners with minimal body roll. The hollow design allows for loads of strength without adding a lot of weight. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB004 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!

Additional Attributes:

GTIN: 00887753325785
Front Sway Bar Adjustable: Fixed
Front Sway Bar Diameter (in): 1.25 inches
Front Sway Bar Diameter (mm): 32.0 mm
Front Sway Bar Type: Hollow
Mounting Hardware Included: Yes
Position: Front
Quantity: Sold as a kit
Sway Bar Finish: Black hammertone powdercoated
Sway Bar Material: Steel

Extended Information:

Emissions : CARB Eligible
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: PK
Dimension: 5 x 10 x 59 inches
Weight: 17 PG

Additional information

Weight 272 oz
Dimensions 5 × 10 × 59 in

Reviews

There are no reviews yet.

Be the first to review “Sway Bar Kit With Bushings, Front, Hollow 1.25″”

Your email address will not be published. Required fields are marked *