Sway Bar Kit, Rear, Hollow, 25mm, 3-hole Adjustable

$209.95

BMR Suspension designed the SB044 sway bar kit for street performance, autocross, and road race applications.

Description

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB045 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty 25mm bar stock, the SB045 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB045 attaches to your S550 Mustang with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing.BMR Suspension designed the SB045 sway bar for street performance, autocross, and road race applications. The three-way adjustable SB045 gives you a 63%-208% increase in rate over the stock bar. The rate increases gives you improved handling characteristics so you can drive harder through corners with minimal body roll. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB045 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!

Additional Attributes:

GTIN: 00887753326348
Mounting Hardware Included: Yes
Position: Rear
Quantity: Sold as a kit
Rear Sway Bar Adjustable: 3-position
Rear Sway Bar Diameter (in): 1.00 inches
Rear Sway Bar Diameter (mm): 25.0 mm
Rear Sway Bar Type: Hollow
Sway Bar Finish: Red powdercoated
Sway Bar Material: Steel

Extended Information:

Emissions : CARB Eligible
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: PK
Dimension: 5 x 10 x 59 inches
Weight: 11 PG

Additional information

Weight 176 oz
Dimensions 5 × 10 × 59 in

Reviews

There are no reviews yet.

Be the first to review “Sway Bar Kit, Rear, Hollow, 25mm, 3-hole Adjustable”

Your email address will not be published. Required fields are marked *